PRODUCT OVERVIEW: 

The Viper foam Gun is the easiest and most cost effective way to clean coils and other HVACR equipment. Dial in the dilution ratio, aim and fire.

• No mixing - high dilution ratio for maximum cost savings
• Technician Safe - developed by a service technician for service technicians

COMPETITIVE POINTS OF DIFFERENCE:

No heavy equipment to carry and no need to pre-dilute, just plug the Viper Foam Gun into any garden hose connection. The foam injection method covers the surface of the coil much faster and increases contact time over conventional pressure sprayers.

APPLICATION:

The Viper Foam Gun is lightweight and easy to use. Just fill the container with neat Viper Heavy Duty or Viper Brite (high foaming concentrates), dial in the desired dilution ratio and start injecting foam into the coil body. The Viper Foam Gun can penetrate soils up to about 80mm deep, or inject up to 300mm deep using the foam funnel attachment.

DIRECTIONS

1. Pour Viper Brite or Viper Heavy Duty into the tank
2. Select your desired dilution ratio:
   A = 1:128, B = 1:64, C = 1:32, D = 1:20, E = 1:10, O = water (chemical siphoning disabled).
3. Spray the entire coil
4. Rinse

FRIDGEY FACTS:

• The Viper Foam Gun will cover the surface of a coil much faster, and in a more efficient way, than a pressure sprayer – and you don’t have to stop and refill as often.
   
• There are five different dilution ratios to choose from: A = 1:128, B = 1:64, C = 1:32, D = 1:20, E = 1:10, O = water (chemical siphoning disabled).
   
• To clean cold room floors and walls, use Viper Heavy Duty, not Viper Brite. Use Viper Heavy Duty on a light A, B or C ratio setting, followed by a thorough rinse.