Henry Straight Check Valve 1"3/8ID 15PSI CP

Check Valves are used in refrigeration and air-conditioning when the liquid or
vapour refrigerant is required to flow in one direction only. The Check Valve
allows for full flow in the direction of operational flow while preventing flow in
the opposite direction. A typical application would be to install a check valve
downstream of an oil separator. This prevents condensed liquid refrigerant
from returning down the discharge line and into the oil separator.

Please note that In-line Check Valves are not suitable for discharge lines
of reciprocating compressors. This is due to the reciprocating compressors
discharge pressure pulsations.

The Henry Technologies range includes both the Lift type and the In-line type
Check Valves.
The Lift Check Valves are: 116, 205 & 2027 Series
(Note: 205 Series is replacing the old 2024 Series)
The In-line Check Valves are: 119 & 120 Series
(Note: 119 & 120 Series is replacing the old 2001 & 2006 Series)

Henry Technologies check valve are suitable for HCFC and HFC refrigerants,
along with their associated oils. Typically, Henry Technologies Check Valves
will start to open at 3.4 kPa and be fully open at 34 kPa